Search Results for: Autopilot

Garmin Autopilot Buzzer

Garmin Autopilot Buzzer

Wire this buzzer to your course compass unit (CCU) to receive audible alerts from your GHP 10.

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Raymarine Autopilot Backbone Cable Kit

Raymarine Autopilot Backbone Cable Kit

Autopilot Backbone Cable Kit

This autopilot backbone cable kit is required to connect the X-10, X-30, X-CAN and X-SOL corepacks to the ST70 Autopilot Control Head.

Kit Includes

  • A06028 – STNG T-piece connector (2)
  • A06031 – Backbone terminators (2)
  • A06036 – Backbone cable 5M

    • SI-TEX SP-80-1 Autopilot w/Rotary Feedback – No Drive Unit

    SI-TEX SP-80-1 Autopilot w/Rotary Feedback - No Drive Unit

    SP-80
    Fixed-Mount Autopilot System
    Cruise Control at Sea. The SP-80 takes the helm and sets you free.

    For boater who know where they’re going. SP-80 takes you where you want to be–effortlessly. It’s smart, precise piloting gives you the extra hand on deck you’ve always needed. And the operation is a snap: Simply set the course and the SP-80 takes the controls, piloting you to your destination with ease and precision. So bait the lines or simply enjoy the sunset. With the SI-TEX SP-80 Autopilot you’re right on course. Hands free, and ready to really let you go.

    • Designed for inboard outboard and sterndrive vessels with either hydraulic or quadrant steering systems.
    • Automatically pilots to your next waypoint using built-in NMEA 0183 Loran/GPS interface.
    • Waterproof control head easily installs flush or surface mounted.
    • System can be expanded by adding fully functional second-station option with the SI-TEX SP-70 Handheld Control Unit.
    • Bold, backlit display with ten levels of brightness for clear reading in any light.
    • Accurate digital displays of rudder angle and operating mode in use, constantly giving you up-to-the minute operating status.
    • Automatic Sea State and Trim controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering.
    • Rudder feedback verifies autopilot’s commands.
    • Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure.
    • Heading Output feature allows you to stabilize radar display.
    • Built-in diagnostics and self tests, plus visual and audible alarms.
    • Power Steering mode offers convenient push-button steering. Stand-By mode for manual steering situations.
    • Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position.
    • Works with solenoid valves also.
    • Old Part# SP-80RLP

    Furuno Autopilot Pump

    Furuno Autopilot Pump

    Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume)

    The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece gear housed in an eccentric ring. This allows for incredibly quiet, reliable and precise operation.

    A hydraulic steering system consists of a hydraulic actuator and one or more steering wheel pumps, or helm pumps. As the steering wheel (helm pump) is turned in the port direction, hydraulic oil is pumped into the port hydraulic steering line. This oil is directed into the port side of the steering cylinder. As the cylinder moves to port, oil from the starboard side of the cylinder returns to the helm pump through the starboard hydraulic lines.

    One end of the cylinder is fixed and the other is connected to a tiller arm, which is connected to a rudder shaft. With this connection to the tiller arm the linear movement of the cylinder to port is changed to rotary movement, which turns the rudder and steers the vessel to port. Moving the steering wheel to starboard produces the same reaction with oil being pumped out of the starboard line and returning through the port line.

    If more than one helm pump is used, a return/fill line must be installed to connect the cases of all helm pumps together.

    The output flow rate of the pumpset determines the speed of the steering cylinder. The PUMPHRP17-12 outputs 1.6 cu. in. of oil per second and requires a 12VDC input.

    WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    Furuno HRP11-12 Autopilot Pump

    Furuno HRP11-12 Autopilot Pump

    Autopilot Pump, 12 VDC, 1.0 Cubic Inches Per Second (For Ram Sizes of Up to 12 Cubic Inches in Volume)

    WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    Furuno Rudder Reference f/Outboards On Navpilot 500 & 511 Autopilots

    Furuno Rudder Reference f/Outboards On Navpilot 500 & 511 Autopilots

    The FAPAR4502 is a Rudder Reference Unit for the NavPilot 500/OB and NavPilot 511/OB series autopilot. The FAPAR4502 has an 8″ maximum cylinder stroke.

    WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    Raymarine S100 Wireless SeaTalk Autopilot Remote Control

    Raymarine S100 Wireless SeaTalk Autopilot Remote Control

    S100

    Wireless SeaTalk autopilot remote control

    S100 Wireless Autopilot Remote

    Compact and lightweight, the S100 remote delivers the freedom of wireless control to any Raymarine SeaTalk autopilot. The bright display is easy to read with two lines of text and a graphical autopilot mode indicator. The 5 button ergonomic keypad and intuitive menu structure provides simple operation and easy access to extended features. Rugged and waterproof the S100 fits in your pocket or clips to your belt, keeping full function autopilot control always within reach.

    S100 Features

    • Two line display with a graphical autopilot status indicator
    • Crisp, high contrast 24 x 127 dot matrix display
    • Backlit display
    • Raised profile on Standby button for easy identification in the dark
    • Keylock security
    • Convenient, replaceable AAA alkaline batteries
    • No longer comes with Belt clip

    Wireless Features:

    • Up to 32 feet (10 meters) wireless operating range from the base station
    • Signal strength indicator
    • Pre-registered each unit leaves the factory already registered to the base station
    • S100 comes with Instruction Manual, S100 Controller, Base Station, Cradle, Lanyard

    The S100 wireless autopilot controller is compatible with the following Raymarine/Autohelm SeaTalk Autopilots:

    • ST1000
    • ST2000
    • ST3000
    • ST4000
    • ST5000
    • SmartPilot ST6001
    • SmartPilot ST7001
    • SmartPilot ST8001
    • SmartPilot S1000

    SI-TEX SP-70 Autopilot w/Pump & Rotary Feedback w/ 18CI pumpset

    SI-TEX SP-70 Autopilot w/Pump & Rotary Feedback w/ 18CI pumpset

    SP-70 Autopilot with Pump & Rotary Feedback

    The SI-TEX SP-70 Autopilot will add relaxation to your cruising and fishing activity. Designed for most any boat and easily installed on outboard, inboard and sterndrive vessels with either hydraulic, or quadrant steering systems.

    Features:

    • Ultra-compact, waterproof Control Unit has simple keypad operation and large LCD display of heading course, rudder angle, operating mode and error messages.
    • Control Unit can be used as dash-mounted keypad or quickly and easily removed from mounting bracket for use as a handheld portable.
    • Additional steering stations can be easily added with optional plug-in connectors.
    • Exceptionally easy to use. Just steer to desired course, press the PILOT key and the system takes over to steer you on your way. Automatically.
    • Built-in NMEA0183 Loran/GPS interface for precise course-line navigation along routes.
    • Bold, backlit displays with ten levels of brightness for clear reading in any light.
    • Digital displays of rudder angle and operation mode in use, constantly giving you up-to-the-minute operating status.
    • Automatic Sea State and Trim Controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering.
    • Rudder feedback verifies autopilot’s commands.
    • Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure.
    • Heading Output feature allows you to stabilize radar display.
    • Built-in diagnostic and self tests, plus visual and audible alarms.
    • Power Steering mode offers convenient push-button steering. Stand By mode for manual steering situations.
    • Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position.
    • Works with solenoid valves also

    Raymarine i50/i60 Wind, Speed, Depth System Pack w/Transducers

    Raymarine i50/i60 Wind, Speed, Depth System Pack w/Transducers

    i50/i60 Wind, Speed, Depth System Pack with Transducers 

    Includes:

    • E70058 – i50 Speed Instrument
    • E70673 – ST900/P120 S/T Thru Hull – 13.7m Cable
    • E70059 – i50 Depth Instrument
    • M78713-PZ – P319 LP Thru Hull Depth Transducer
    • E70061 – i60 Analogue Wind Instrument
    • E22078 – Short Arm Wind Transducer

    i60 SeaTalkng Instruments

    The  i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine’s exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays.

    For the ultimate in flexibility, the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours.

    The ultra-sleek design of the i60 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.

    i60 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine’s industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase.

    i60 Wind Instrument with Windvane Transducer

    Full-featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting, and high-contrast text and graphics.

    • Short arm vane supplied with 30m (97.5′) cable
    • Compatible with Raymarine’s masthead transducer (recommended for sailboats)
    • Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack
    • Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed
    • Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument

    i60 Features:

    • Ultra-modern design complements Raymarine’s latest a-Series, c-Series, and e-Series Multifunction display and instrument systems
    • Large, crisp LCDs with high contrast for excellent visibility
    • Red backlighting for outstanding night-time visibility
    • SeaTalkng and SeaTalk-1 Networking for maximum flexibility
    • Fully compatible with i70, p70 and p70R Color Instruments and Autopilots
    • 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

    i50 SeaTalkng Instruments 

    The  i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine’s exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays.

    For the ultimate in flexibility, the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours.

    The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.

    i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine’s industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase.

    i50 Speed Instrument 

    The i50 Speed Instrument offers easy-to-read displays of boat speed through water, GPS speed over ground (SOG), velocity made good (VMG), average speed, and max speed, distance log, trip log, and water temperature. i50 Speed also includes a count-up timer and 2 race-start timers.

    • Red backlighting for outstanding night-time visibility.
    • SeaTalkng and SeaTalk-1 connectivity for maximum flexibility
    • Connect additional i50 speed displays
    • Built-in speed transducer connection

    i50 Depth Instrument 

    The i50 Depth Instrument offers accurate and reliable displays of depth, max depth, and minimum depth. Shallow and deep depth alarms will keep you alert, along with a shallow and deep anchor alarm.

    • Red backlighting for outstanding night-time visibility.
    • SeaTalkng and SeaTalk-1 connectivity for maximum flexibility
    • Connect additional i50 depth displays
    • Built-in depth transducer connection

    i50 Features:

    • Ultra-modern design complements Raymarine’s latest a-Series, c-Series, and e-Series Multifunction display and instrument systems.
    • Large, crisp LCDs with high contrast for excellent visibility.
    • Red backlighting for outstanding night-time visibility.
    • SeaTalkng and SeaTalk-1 Networking for maximum flexibility.
    • Fully compatible with i70, p70, and p70R Color Instruments and Autopilots.
    • 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy