1050 Depthmaster Downrigger (23″)
The all time Scotty leader in performance and sales. Compact, versatile and reliable, the perfect introductory downrigger. One foot per turn spool operates easily with either hand from a sitting position in the boat.
PRODUCT OVERVIEW:
- Spray protected positive-drive depth counter
- 200 ft. of 150 lb. Test, Stainless Steel Downrigger Cable
- 1 ft. per turn of the spool
- Boom mounted adjustable 355 Rodmaster II Rod Holder
- Includes 1010 Quick-Slide Deck Mounting Bracket
- Marine grade stainless steel boom
- Clutch brake with the largest braking surface in the industry – In the event of a bottom hang-up, it will pay out to avoid loosing gear
- Includes Power Grip Plus Line Release
- Fully assembled and factory tested with complete saltwater protection
Downrigger Boom Length: 23″ stainless steel boom
Downrigger Boom Diameter: 3/4″
Rod Holder Interior Diameter: 1.85″
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
No. 1091 – Longarm Downrigger Combo Pack (36″-60″)
Ideal for big boats. All the same features as the 1090 plus with the addition of the Pedestal Swivel Mount.
PRODUCT OVERVIEW:
- High speed, 2 ft. per turn of the spool coupled with an extended handle for extra leverage
- Spray protected positive-drive depth counter
- 200 ft. of 150 lb. Test, Stainless Steel Downrigger Cable
- Boom mounted adjustable 358 Rodmaster II Rod Holder
- Marine grade stainless steel boom
- Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position
- Includes 1026 Swivel Pedestal Mount with 16 available positions
- Clutch brake with the largest braking surface in the industry – In the event of a bottom hang-up, it will pay out to avoid loosing gear
- Includes Power Grip Plus Line Release
- Fully assembled and factory tested with complete saltwater protection
Downrigger Boom Length: 36″-60″ telescoping stainless steel boom
Downrigger Boom Diameter: 1 1/4″
Rod Holder Interior Diameter: 1.85″
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Lake-Troll™
Get into the strike zone and let the fish come to you.
GET IN THE GAME
These hardworking, durable downriggers are ideal for smaller boats and fishermen just beginning to realize the advantage of fishing a downrigger. Our manual downriggers are built to deliver trusted Cannon® performance while standing up to harsh saltwater conditions.
The Lake-Troll™ uses a clutch/brake for controlled, safe descent without cranking. Features a durable copolymer boom and a convenient line release mounted on a tab-lock base. Break into downrigging with one of our highly capable manual models.
Features:
- Vertical spool designed with clutch/brake system for safe, controlled one-handed weight descent
- Quick mount tab-lock base
- Swivel-head depth counter
- 18" copolymer boom
- Pre-spooled with 100 feet of stainless steel cable
- Includes line release and tube style rod holder
- Saltwater-resistant construction
- Limited lifetime warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
8054 Slate Grey – 3 Position – Vertical
Features:
- Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
- Designed for flybridge and open cockpit applications
- ON-OFF Contura Switches
- ON indicating LEDs embedded in switches
- Watertight mounting gasket included
- Countersunk mounting holes throughout
- Two-part polyurethane slate gray finish
- Industry standard height and width
- Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
- Completely wired and ready to install
Specifications:
- Weatherproof: Water Resistant
- Positions: 3
- Nominal Voltage: 12v / 24v DC
- Panel Cumulative Rating: 45A
- Switch Rating: 20A @ 12v DC / 15A @ 24v DC
- Height: 3.75″
- Width: 5.25″
- Depth: 3″
Included:
- (3) 5021 Panel Mount AGC/MDL Fuse Holder
- (1) 8030 Basic DC Panel Label Set – 30 Labels
- (3) 8230 Contura Switch SPST Gray – OFF-ON
*NOTE: Waterproof panel labels are not backlit
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
8053 Slate Grey – 6 Position – Vertical
Features:
- Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
- Designed for flybridge and open cockpit applications
- ON-OFF Contura Switches
- ON indicating LEDs embedded in switches
- Watertight mounting gasket included
- Countersunk mounting holes throughout
- Two-part polyurethane slate gray finish
- Industry standard height and width
- Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
- Completely wired and ready to install
Specifications:
- Weatherproof: Water Resistant
- Positions: 6
- Nominal Voltage: 12v / 24v DC
- Panel Cumulative Rating: 45A
- Switch Rating: 20A @ 12v DC / 15A @ 24v DC
- Height: 7.5″
- Width: 5.25″
- Depth: 3″
Included:
- (6) 5021 Panel Mount AGC/MDL Fuse Holder
- (1) 8030 Basic DC Panel Label Set – 30 Labels
- (6) 8230 Contura Switch SPST Gray – OFF-ON
*NOTE: Waterproof panel labels are not backlit
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
8261 Waterproof Panel 8 Position – Slate Grey
Features:
- Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
- Designed for flybridge and open cockpit applications
- ON-OFF Contura Switches
- ON indicating LEDs embedded in switches
- Watertight mounting gasket included
- Countersunk mounting holes throughout
- Two-part polyurethane slate gray finish
- Industry standard height and width
- Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
- Completely wired and ready to install
Specifications:
- Weatherproof: Water Resistant
- Positions: 8
- Nominal Voltage: 12v / 24v
- Panel Cumulative Rating: 90A
- Switch Rating: 20A @ 12v DC / 15A @ 24v DC
- Height: 3.75″
- Width: 9.37″
- Depth: 3″
Included:
- (8) 5021 Panel Mount AGC/MDL Fuse Holder
- (1) 8214 Black 60 Label Set
- (8) 8230 Contura Switch SPST Gray – Off-On
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
8262 Waterproof Panel 4 Position – Slate Grey
Features:
- Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
- Designed for flybridge and open cockpit applications
- ON-OFF Contura Switches
- ON indicating LEDs embedded in switches
- Watertight mounting gasket included
- Countersunk mounting holes throughout
- Two-part polyurethane slate gray finish
- Industry standard height and width
- Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
- Completely wired and ready to install
Specifications:
- Weatherproof: Water Resistant
- Positions: 4
- Nominal Voltage: 12v / 24v
- Panel Cumulative Rating: 45A
- Switch Rating: 20A @ 12v DC / 15A @ 24v DC
- Height: 3.75″
- Width: 5.25″
- Depth: 3″
Included:
- (4) 5021 Panel Mount AGC/MDL Fuse Holder
- (1) 8214 Black 60 Label Set
- (4) 8230 Contura Switch SPST Gray – Off-On
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
8263 Contura Single Bilge Pump Control Panel
Blue Sea Systems water resistant 12/24 Volt DC Bilge Pump control panel with Contura rocker switch and fuse holder for fuses up to 20amp
Features:
- Designed for 12 or 24V DC systems
- ON – OFF – AUTO Contura Switch
- Watertight mounting gasket
- Fuse holders accept commonly available AGC and MDL glass fuses
- “ON” LED embedded in switch indicates pump is running
- Completely wired and ready to install
Specifications:
- Weatherproof – Water Resistant
- No. of Bilge Pumps – one (1)
- Nominal Voltage – 12/24V
- Panel Cumulative Rating – 45A
- Switch Rating: 20A @ 12V DC / 15A @ 24V DC
- Dimensions (H x W x D) – 3.75″ x 2.25″ x 3″
- Weight – .25lb
In the Box:
- Panel Mount AGC/MDL Fuse Holder (P/N 5021)
- Contura III Switch SPDT – On – OFF – (ON) (P/N 7944)
- Black 60 Label Set (P/N 8214)
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
6′ Flag Pole with USA Flag for Rod Holders/ Rocket Launchers.
USA Flag included, along with pole.
The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.
6′ Flag Pole with Dive Flag for Rod Holders/ Rocket Launchers.
Dive Flag included, along with pole.
The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.
