70 Series Standard Flush Mount Rod Holder – 0 Degree – Stainless Steel – Gimbal Bar Bottom – Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.
Features:
- 316L stainless steel
- Fits 2-3/16 in. hole diameter
- No logo on the cap for a sleek low profile
- The liner runs the full length of the tube
Specifications:
- Degrees: 0 degrees
- Bottom Style: Bar
- Liner Color: Black
- Inner Diameter: 1-5/8 in.
- Cap Size: 4-1/2 in. long x 3-5/8 in. wide
- Tube Length: 9 in.
- Gimbal Bar: ¼ in. wide x ½ in. tall
70 Series Standard Flush Mount Rod Holder – 15 Degree – Stainless Steel – Gimbal Bar Bottom – Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.
Features:
- 316L stainless steel
- Fits 2-3/16 in. hole diameter
- No logo on the cap for a sleek low profile
- The liner runs the full length of the tube
Specifications:
- Degrees: 15 degrees
- Bottom Style: Bar
- Liner Color: Black
- Inner Diameter: 1-5/8 in.
- Cap Size: 4-1/2 in. long x 3-5/8 in. wide
- Tube Length: 9 in.
- Gimbal Bar: ¼ in. wide x ½ in. tall
70 Series Standard Flush Mount Rod Holder – 30 Degree – Stainless Steel – Gimbal Bar Bottom – Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.
Features:
- 316L stainless steel
- Fits 2-3/16 in. hole diameter
- No logo on the cap for a sleek low profile
- The liner runs the full length of the tube
Specifications:
- Degrees: 30 degrees
- Bottom Style: Bar
- Liner Color: Black
- Inner Diameter: 1-5/8 in.
- Cap Size: 4-1/2 in. long x 3-5/8 in. wide
- Tube Length: 9 in.
- Gimbal Bar: ¼ in. wide x ½ in. tall
70 Series Standard Flush Mount Rod Holder – 0 Degree – Stainless Steel – Cast Bottom – Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.
Features:
- 316L stainless steel
- Fits 2-3/16 in. hole diameter
- Cast models feature a 1/2 in. drain hole
- No logo on the cap for a sleek low profile
- The liner runs the full length of the tube
Specifications:
- Degrees: 0 degrees
- Bottom Style: Cast
- Liner Color: Black
- Inner Diameter: 1-5/8 in.
- Cap Size: 4-1/2 in. long x 3-5/8 in. wide
- Tube Length: 9 in.
70 Series Standard Flush Mount Rod Holder – 15 Degree – Stainless Steel – Cast Bottom – Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.
Features:
- 316L stainless steel
- Fits 2-3/16 in. hole diameter
- Cast models feature a 1/2 in. drain hole
- No logo on the cap for a sleek low profile
- The liner runs the full length of the tube
Specifications:
- Degrees: 15 degrees
- Bottom Style: Cast
- Liner Color: Black
- Inner Diameter: 1-5/8 in.
- Cap Size: 4-1/2 in. long x 3-5/8 in. wide
- Tube Length: 9 in.
70 Series Standard Flush Mount Rod Holder – 30 Degree – Stainless Steel – Cast Bottom – Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.
Features:
- 316L stainless steel
- Fits 2-3/16 in. hole diameter
- Cast models feature a 1/2 in. drain hole
- No logo on the cap for a sleek low profile
- The liner runs the full length of the tube
Specifications:
- Degrees: 30 degrees
- Bottom Style: Cast
- Liner Color: Black
- Inner Diameter: 1-5/8 in.
- Cap Size: 4-1/2 in. long x 3-5/8 in. wide
- Tube Length: 9 in.
80 Series Standard Flush Mount Rod Holder – 0 Degree – Stainless Steel – Cast Bottom – Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.
Features:
- 316L stainless steel
- Fits 2-1/2 in. hole diameter
- Cast models feature a 1/2 in. drain hole
- No logo on the cap for a sleek low profile
- The liner runs the full length of the tube
Specifications:
- Degrees: 0 degrees
- Bottom Style: Cast
- Liner Color: Black
- Inner Diameter: 1-7/8 in.
- Cap Size: 5-1/8 in. long x 4-1/4 in. wide
- Tube Length: 10-1/2 in.
80 Series Standard Flush Mount Rod Holder – 30 Degree – Stainless Steel – Cast Bottom – Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.
Features:
- 316L stainless steel
- Fits 2-1/2 in. hole diameter
- Cast models feature a ½ in. drain hole
- No logo on the cap for a sleek low profile
- The liner runs the full length of the tube
Specifications:
- Degrees: 30 degrees
- Bottom Style: Cast
- Liner Color: Black
- Inner Diameter: 1-7/8 in.
- Cap Size: 5-1/8 in. long x 4-1/4 in. wide
- Tube Length: 10-1/2 in.
Side Mount Rod Holder – Flat Dark Earth
This side-mount rod holder features an integral, molded-in standoff located on the back of the rod holder. This standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4″ in diameter. Constructed of injection-molded polypropylene. Installs with two #10 RH fasteners (not included).
Specifications:
- Length (inch): 11-11/16″
- Diameter (inch): 1-3/4″
- Length Between Fasteners (inch): 6-1/4″
- Color: Flat dark earth
- Fastener: #10 RH
- Weight: 0.22 lb.
Side Mount Rod Holder – Flat Dark Earth
This flush-mount rod holder can accommodate rods up to 1-5/8″ in diameter. Features a 30° angle. Constructed of UV-resistant injection-molded ABS. Installs with three 1/4″ FH fasteners (not included).
Specifications:
- Length (inch): 9-3/16″
- Diameter (inch): 1-5/8″
- Color: Flat dark earth
- Fastener (not included): 1/4″ FH
- Weight: 0.40 lb.