Seaview 13.25″ Pre-Drilled Dual Mount f/Most Closed Dome Radars – Black – Top Plate Required

Seaview 13.25" Pre-Drilled Dual Mount f/Most Closed Dome Radars - Black - Top Plate Required

13.25″ Pre-Drilled Dual Mount for Most Closed Dome Radars – Black – Top Plate Required

Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management.

Compact Design

Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must.

Eliminate Interference

A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation.

Universal

The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.

Modular Top Plate

The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. 

*Top Plate Sold Separately

Seaview 23.75″ Pre-Drilled Dual Mount f/Open Array Radars Up to 4.5 – Black – Top Plate Required

Seaview 23.75" Pre-Drilled Dual Mount f/Open Array Radars Up to 4.5' - Black - Top Plate Required

23.75″ Pre-Drilled Dual Mount for Open Array Radars Up to 4.5′ – Black – Top Plate Required

Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management.

Compact Design

Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must.

Eliminate Interference

A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation.

Universal

The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.

Modular Top Plate

The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. 

*Top Plate Sold Separately

Seaview 28″ Pre-Drilled Dual Mount f/Open Array Radars Up to 4.5 – Black – Top Plate Required

Seaview 28" Pre-Drilled Dual Mount f/Open Array Radars Up to 4.5' - Black - Top Plate Required

28″ Pre-Drilled Dual Mount for Open Array Radars Up to 4.5′ – Black – Top Plate Required

Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management.

Compact Design

Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must.  

Eliminate Interference

A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation.

Universal

The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.  

Modular Top Plate

The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. 

*Top Plate Sold Seperately

Garmin GPSMAP® 1242xsv Keyed Networking Combo w/GMR 18 HD+ Dome Radar

Garmin GPSMAP® 1242xsv Keyed Networking Combo w/GMR 18 HD+ Dome Radar

GPSMAP® 1242xsv Keyed Networking Combo with GMR 18 HD+ Dome Radar

12-inch Chartplotter/Sonar Combo Is “All-in-1” Solution

  • 12-inch color display with keypad interface and multifunction control knob
  • Preloaded U.S. LakeVü g3 maps and BlueChart® g3 charts feature Navionics® data and Auto Guidance¹ technology
  • High-sensitivity internal 10 Hz GPS and GLONASS receiver
  • Built-in single channel CHIRP sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar and Panoptix™ support (transducers sold separately)

Experience an advanced all-in-1 solution with our 12-inch GPSMAP 1242xsv keyed combo.  Garmin CHIRP sonar, CHIRP ClearVü and CHIRP SideVü (also available without transducer). It also has built-in support for Panoptix all-seeing sonar and premium Garmin sonar modules (transducers sold separately). Features a large, bright screen coupled with a quick and easy-to-use keypad interface with user-programmable keys and a multifunction control knob.

Complete Network Sharing

Garmin Marine Network support allows sharing of sonar, maps, user data, dome or open-array radar, IP cameras and Panoptix™ sonar among multiple units. Includes NMEA 2000 network connectivity and NMEA 0183 support for autopilots, digital switching, weather, FUSION-Link, VHF, AIS and other sensors.

Built-in ANT® Connectivity

Enjoy built-in ANT wireless connectivity directly to quatix® marine watch, Garmin Nautix™ in-view display, gWind™ Wireless 2 transducer, GNX™ Wind marine instrument and wireless remote controls.

The Ultimate Connected Boating App

Built in Wi-Fi gives you access to the free all-in-one ActiveCaptain™ app, so you can manage your marine experience from nearly anywhere. It creates a simple yet powerful connection between your compatible mobile device and your Garmin chartplotter, charts, maps and the boating community. Wherever you are, you’ll have unlimited access to your cartography, the ability to purchase new maps and charts and access to the Garmin Quickdraw™ Contours Community. Stay connected with smart notifications on your chartplotter screen. You can also plan a trip or prefish a lake, and ActiveCaptain will automatically sync with your chartplotter. Even get notifications for software updates, and decide when to download them on your device.

Built-in Sonar Capabilities

Right out of the box, you have access to some amazing sonar capabilities; all you have to add are transducers. Comes with built-in Garmin 1 kW CHIRP sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar. It even supports Panoptix all-seeing sonar, premium Garmin sonar modules and a wide range of transducers (sold separately).

Networked combos can share their internal sonar with any other device on the network. You can also choose what information is overlaid on the sonar screen; for example, radar, time of day or GPS speed.

Heading, Position Refreshed 10 Times per Second

Fast, responsive built-in 10 Hz GPS and GLONASS receiver refreshes your position and heading 10 times each second to make your movement on the screen more fluid. It makes dropping up to 5,000 accurate waypoints — and finding your way back to them — quick and easy.

Preloaded with Exceptional Garmin Cartography

LakeVü g3 inland maps and BlueChart® g3 coastal charts provide industry-leading coverage, clarity and detail with integrated Garmin and Navionics® data and Auto Guidance1 technology. LakeVü g3 and BlueChart g3 include Auto Guidance1, which uses your desired depth and overhead clearance to calculate routes and provide a suggested path to follow. LakeVü g3 provides coverage on more than 17,000 lakes with up to 1’ contours. BlueChart g3 also includes NOAA raster cartography, available as a free downloadable feature via the ActiveCaptain® app. Additionally, they both offer easy-to-use features such as Depth Range Shading and Shallow Water Shading, which let you view your target depth to avoid running aground.

Upgrade to Our Best Maps on the Water

Accessory map purchases, such as LakeVü g3 Ultra or BlueChart® g3 Vision, add even more features and detail to your maps and charts. LakeVü g3 Ultra and BlueChart g3 Vision add high-resolution relief shading, which provides an easy-to-interpret, clearer view of bottom structure than contour lines alone — plus many other chart and map-enhancing features. 

Quickdraw Contours to Create Your Own HD Maps

Instantly create personalized HD fishing maps on screen with 1-foot contours. Tailor them to fit your needs. These are your maps — you own them. Keep the data to yourself, or share it with the Quickdraw Community on Garmin Connect™.

Built-in SailAssist Features

To help you gain a wind-maximizing competitive edge, your chartplotter features a pre-race guidance page that shows your virtual starting line along with data fields showing laylines, time to burn before the start and a race timer that can be synchronized across all your networked Garmin GPS products. In addition, other supported sailing features include an enhanced wind rose, heading and course-over-ground lines, set and drift, true and apparent wind data and more.

GPX Waypoints Transfer

If you have waypoints, tracks or frequently used routes stored on another manufacturer’s GPS product — or on a Garmin handheld device — it’s easy to transfer those items to your new Garmin chartplotter via industry-standard GPX software formatting.

In The Box

  • GPSMAP 1242xsv chartplotter
  • Power/data cable
  • NMEA 2000 T-connector
  • NMEA 2000 drop cable (2 m)
  • 8-pin transducer to 12-pin sounder adapter cable
  • Bail mount kit with knobs
  • Flush mount kit with gasket
  • Protective cover
  • Trim piece snap covers
  • Documentation

Connections

  • Garmin Marine Network™ Ports: 2
  • Transducer Ports: 1 (12 Pin)
  • NMEA 2000® Port: 1
  • NMEA 0183 Input Ports: 1
  • NMEA 0183 Output Ports: 1
  • Video Input Ports:  1 BNC
  • Video Output Ports: No
  • Wireless Connectivity: Yes

¹Auto Guidance is for planning purposes only and does not replace safe navigation operations.

iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Wi-Fi is a registered trademark of the Wi-Fi Alliance.

GMR 18 HD+ Dome Radar w/ 15m cable

The compact GMR 18 HD+ dome radar is a good choice for boats with limited room for radar placement. It delivers 4 kW of transmit power and clear echo definition at all ranges to enhance situational awareness. Overlay radar images onto your chartplotter map page; however, for best overlay results, an optional autopilot or heading sensor is recommended. It also helps you avoid traffic on the water. GMR 18 HD+ provides MARPA target tracking when combined with a multifunction display and heading sensor (sold separately).

Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts sea clutter, depending on sea conditions. GMR 18 HD+ features 8-bit true color resolution for a clear presentation on your chartplotter screen. It has a maximum range of 36 nautical miles with a minimum range of 20 meters and a rotation speed of 24 RPM. There are no complex user settings, and it’s easy to install and start using.

Features:

  • Streamlined 18-inch 4kW dome radar
  • Deliver 4kW of transmit power and clear echo definition at all ranges
  • Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions
  • Dynamic Sea Filter automatically adjusts gain to changing sea conditions
  • Overlays the radar image on the chartplotter map page (autopilot or heading sensor is recommended for best results)
  • MARPA target tracking when combined with a multifunction display and heading sensor (sold separately)
  • Beam angles: 5.0° horizontal, 25° vertical
  • Max range: 36 nautical miles
  • Minimum range: 20 meters
  • Rotation speed: 24 revolutions/minute
  • No complex user settings; easy to install and start using

Comes with:

  • GMR 18 HD+ radome
  • Mounting hardware kit
  • Power cable (15 m/49.21 ft)
  • Network cable (15 m/49.21 ft)
  • Installation instructions
  • Mounting template

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Garmin GPSMAP® 1042xsv w/GMR 18HD+ Radar

Garmin GPSMAP® 1042xsv w/GMR 18HD+ Radar

GPSMAP® 1042xsv with GMR 18HD+ Radar

GPSMAP®1042xsv

Experience an advanced all-in-1 solution with our 10-inch GPSMAP® 1042xsv keyed combo. Features a large, bright screen coupled with a keypad interface and multifunction control knob. Comes with built-in Garmin CHIRP sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar. Supports Panoptix™ all-seeing sonar, premium Garmin sonar Modules and a wide range of transducers (sold separately). Enjoy built-in wireless for Garmin mobile apps. Garmin Marine Network support allows sharing of sonar, maps, user data, radar, IP cameras and Panoptix sonar among multiple units. Plus, there’s NMEA 2000® and NMEA 0183 support for network connectivity, including autopilots, digital switching, weather, media, VHF, AIS and other sensors. These units also include integrated ANT® support for use with quatix® 3 marine watch, Garmin Nautix™ in-view display, gWind™ Wireless 2 transducer, GNX™ Wind marine instrument and wireless remote controls. Preloaded premium mapping features include both U.S. LakeVü HD maps and BlueChart® g2 HD charts plus Quickdraw Contours software and the Quickdraw Community on Garmin Connect™ online network.

Features:

  • Large, bright 10-inch screen with keypad interface and multifunction control knob
  • Built-in Garmin CHIRP sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar (transducers sold seperately)
  • Supports Panoptix™ all-seeing sonar and premium Garmin sonar modules
  • Built-in wireless capabilities for Garmin mobile apps and VIRB® action camera integration
  • Supports Garmin Marine Network; allows sharing of sonar, radar, maps, user data, radar, IP cameras and Panoptix™ sonar among multiple units
  • NMEA 2000® and NMEA 0183 support for network connectivity, including autopilots, digital switching, weather, media, VHF, AIS and other sensors
  • Preloaded with both US LakeVü HD maps and BlueChart® g2 HD charts
  • Includes Quickdraw Contours map drawing software
  • Built-in SailAssist features, including laylines, race features, set and drift, wind data and more
  • Integrated ANT® support for use with quatix® 3 marine watch, Garmin Nautix™ in-view display, gWind™ Wireless 2 transducer, GNX™ Wind marine instrument and wireless remote controls

GMR 18HD+ Radar

The streamlined GMR 18 HD+ dome radar delivers 4 kW of transmit power and clear echo definition at all ranges to enhance situational awareness. You can overlay radar images onto your chartplotter map page. However, for best overlay results, an optional autopilot or heading sensor is recommended. MARPA target tracking is also available when combined with a multifunction display and heading sensor (sold separately). Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts sea clutter depending, on sea conditions. Features 8-bit true color resolution for a clear presentation on your chartplotter screen. The compact GMR 18 HD+ is a good choice for boats with limited room for radar placement.

Features:

  • Streamlined 18-inch 4kW dome radar
  • Deliver 4kW of transmit power and clear echo definition at all ranges
  • Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions
  • Dynamic Sea Filter automatically adjusts gain to changing sea conditions
  • Overlays the radar image on the chartplotter map page (autopilot or heading sensor is recommended for best results)
  • MARPA target tracking when combined with a multifunction display and heading sensor (sold separately)
  • Beam angles: 5.0° horizontal, 25° vertical
  • Max range: 36 nautical miles
  • Minimum range: 20 meters
  • Rotation speed: 24 revolutions/minute
  • No complex user settings; easy to install and start using

In The Box

  • GPSMAP 1042xsv chartplotter
  • Power/data cable
  • NMEA 2000 T-connector
  • NMEA 2000 drop cable (2 m)
  • 8-pin transducer to 12-pin sounder adapter cable
  • Bail mount kit with knobs
  • Flush mount kit with gasket
  • Protective cover
  • Trim piece snap covers
  • Documentation
  • GMR 18 HD+ radome
  • Mounting hardware kit
  • Power cable (15 m/49.21 ft)
  • Network cable (15 m/49.21 ft)
  • Installation instructions
  • Mounting template

Connections

  • Garmin Marine Network™ Ports: 2
  • Transducer Ports: 1 (12 Pin)
  • NMEA 2000® Port: 1
  • NMEA 0183 Input Ports: 1
  • NMEA 0183 Output Ports: 1
  • Video Input Ports:  1 BNC
  • Video Output Ports: No
  • Wireless Connectivity: Yes

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Garmin GPSMAP® 1042xsv w/GMR 18HD+ Radar & GT52HW-TM

Garmin GPSMAP® 1042xsv w/GMR 18HD+ Radar & GT52HW-TM

GPSMAP® 1042xsv with GMR 18HD+ Radar & GT52HW-TM

GPSMAP®1042xsv

Experience an advanced all-in-1 solution with our 10-inch GPSMAP® 1042xsv keyed combo. Features a large, bright screen coupled with a keypad interface and multifunction control knob. Comes with built-in Garmin CHIRP sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar. Supports Panoptix™ all-seeing sonar, premium Garmin sonar Modules and a wide range of transducers (sold separately). Enjoy built-in wireless for Garmin mobile apps. Garmin Marine Network support allows sharing of sonar, maps, user data, radar, IP cameras and Panoptix sonar among multiple units. Plus, there’s NMEA 2000® and NMEA 0183 support for network connectivity, including autopilots, digital switching, weather, media, VHF, AIS and other sensors. These units also include integrated ANT® support for use with quatix® 3 marine watch, Garmin Nautix™ in-view display, gWind™ Wireless 2 transducer, GNX™ Wind marine instrument and wireless remote controls. Preloaded premium mapping features include both U.S. LakeVü HD maps and BlueChart® g2 HD charts plus Quickdraw Contours software and the Quickdraw Community on Garmin Connect™ online network.

Features:

  • Large, bright 10-inch screen with keypad interface and multifunction control knob
  • Built-in Garmin CHIRP sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar (transducers sold seperately)
  • Supports Panoptix™ all-seeing sonar and premium Garmin sonar modules
  • Built-in wireless capabilities for Garmin mobile apps and VIRB® action camera integration
  • Supports Garmin Marine Network; allows sharing of sonar, radar, maps, user data, radar, IP cameras and Panoptix™ sonar among multiple units
  • NMEA 2000® and NMEA 0183 support for network connectivity, including autopilots, digital switching, weather, media, VHF, AIS and other sensors
  • Preloaded with both US LakeVü HD maps and BlueChart® g2 HD charts
  • Includes Quickdraw Contours map drawing software
  • Built-in SailAssist features, including laylines, race features, set and drift, wind data and more
  • Integrated ANT® support for use with quatix® 3 marine watch, Garmin Nautix™ in-view display, gWind™ Wireless 2 transducer, GNX™ Wind marine instrument and wireless remote controls

GMR 18HD+ Radar

The streamlined GMR 18 HD+ dome radar delivers 4 kW of transmit power and clear echo definition at all ranges to enhance situational awareness. You can overlay radar images onto your chartplotter map page. However, for best overlay results, an optional autopilot or heading sensor is recommended. MARPA target tracking is also available when combined with a multifunction display and heading sensor (sold separately). Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts sea clutter depending, on sea conditions. Features 8-bit true color resolution for a clear presentation on your chartplotter screen. The compact GMR 18 HD+ is a good choice for boats with limited room for radar placement.

Features:

  • Streamlined 18-inch 4kW dome radar
  • Deliver 4kW of transmit power and clear echo definition at all ranges
  • Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions
  • Dynamic Sea Filter automatically adjusts gain to changing sea conditions
  • Overlays the radar image on the chartplotter map page (autopilot or heading sensor is recommended for best results)
  • MARPA target tracking when combined with a multifunction display and heading sensor (sold separately)
  • Beam angles: 5.0° horizontal, 25° vertical
  • Max range: 36 nautical miles
  • Minimum range: 20 meters
  • Rotation speed: 24 revolutions/minute
  • No complex user settings; easy to install and start using

In The Box:

  • GPSMAP 1042xsv chartplotter
  • GT52HW-TM transducer
  • Power/data cable
  • NMEA 2000 T-connector
  • NMEA 2000 drop cable (2 m)
  • Transducer
  • Bail mount kit with knobs
  • Flush mount kit with gasket
  • Protective cover
  • Trim piece snap covers
  • Documentation
  • GMR 18 HD+ radome
  • Mounting hardware kit
  • Power cable (15 m/49.21 ft)
  • Network cable (15 m/49.21 ft)
  • Installation instructions
  • Mounting template

Connections:

  • Garmin Marine Network™ Ports: 2
  • Transducer Ports: 1 (12 Pin)
  • NMEA 2000® Port: 1
  • NMEA 0183 Input Ports: 1
  • NMEA 0183 Output Ports: 1
  • Video Input Ports:  1 BNC
  • Video Output Ports: No
  • Wireless Connectivity: Yes

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Garmin GPSMAP® 1042xsv Keyed Networking Combo – U.S., Canada, Bahamas w/GMR 18 xHD Radar

Garmin GPSMAP® 1042xsv Keyed Networking Combo - U.S., Canada, Bahamas w/GMR 18 xHD Radar

GPSMAP® 1042xsv Keyed Networking Combo – U.S., Canada, Bahamas with GMR 18 xHD Radar

10-inch Chartplotter/Sonar Combo Is All-in-1 Solution

  • 10-inch color display with keypad interface and multifunction control knob
  • Preloaded U.S. LakeVü HD maps and BlueChart® g2 charts
  • High-sensitivity internal 10 Hz GPS and GLONASS receiver
  • Built-in single channel CHIRP sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar and Panoptix™ support (transducers sold separately)

Experience an advanced all-in-1 solution with our 10-inch GPSMAP 1042xsv keyed combo. Includes transducer for Garmin CHIRP sonar, CHIRP ClearVü and CHIRP SideVü (also available without transducer). It also has built-in support for Panoptix all-seeing sonar and premium Garmin sonar modules (transducers sold separately). Features a large, bright screen coupled with a quick and easy-to-use keypad interface with user-programmable keys and a multifunction control knob.

Complete Network Sharing

Garmin Marine Network support allows sharing of sonar, maps, user data, dome or open-array radar, IP cameras and Panoptix sonar among multiple units. Includes NMEA 2000® network connectivity and NMEA 0183 support for autopilots, digital switching, weather, media, VHF, AIS and other sensors.

Built-in ANT® Connectivity

Enjoy built-in ANT wireless connectivity directly to quatix® marine watches, Garmin Nautix™ in-view display, gWind™ Wireless 2 transducer, GNX™ Wind marine instrument and wireless remote controls. You can even stream and control a VIRB action camera from the chartplotter.

The Ultimate Connected Boating App

Built in Wi-Fi gives you access to the free all-in-one ActiveCaptain™ app, so you can manage your marine experience from nearly anywhere. It creates a simple yet powerful connection between your compatible mobile device and your Garmin chartplotter, charts, maps and the boating community. Wherever you are, you’ll have unlimited access to your cartography, the ability to purchase new maps and charts and access to the Garmin Quickdraw™ Contours Community. Stay connected with smart notifications on your chartplotter screen. You can also plan a trip or prefish a lake, and ActiveCaptain will automatically sync with your chartplotter. Even get notifications for software updates, and decide when to download them on your device.

Built-in Sonar Capabilities

Right out of the box, you have access to some amazing sonar capabilities; all you have to add are transducers. Comes with built-in Garmin 1 kW CHIRP sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar. It even supports Panoptix all-seeing sonar, premium Garmin sonar modules and a wide range of transducers (sold separately).

Networked combos can share their internal sonar with any other device on the network. You can also choose what information is overlaid on the sonar screen; for example, radar, time of day or GPS speed.

Heading, Position Refreshed 10 Times per Second

Fast, responsive built-in 10 Hz GPS and GLONASS refreshes your position and heading 10 times each second to make your movement on the screen more fluid. It makes dropping up to 5,000 accurate waypoints — and finding your way back to them — quick and easy.

Preloaded with Exceptional Garmin Cartography

You get both LakeVü HD inland waters mapping and BlueChart g2 coastal charts covering the coastal U.S. (East Coast, West Coast, Gulf of Mexico, U.S. and the Canadian side of the Great Lakes).

LakeVü HD provides highly detailed freshwater maps that include 17,000+ U.S. lakes, rivers and reservoirs. Included in those are more than 13,000 HD lakes with 1-foot contours shoreline to shoreline. Upgrade to LakeVü HD Ultra with Max Def Lakes.

BlueChart g2 provides basic coastal charts, tidal and current stations, depth contours, IALA nav symbols and fishing charts.

Upgrade to Our Best Maps on the Water

Two SD™ card slots provide expandable memory for accessory map purchases, such as LakeVü HD Ultra or BlueChart g2 HD or BlueChart® g2 Vision® HD, which adds Garmin patented Auto Guidance¹and other great features.

Quickdraw Contours to Create Your Own HD Maps

Instantly create personalized HD fishing maps on screen with 1-foot contours. Tailor them to fit your needs. These are your maps — you own them. Keep the data to yourself, or share it with the Quickdraw Community on Garmin Connect™.

Built-in SailAssist Features

To help you gain a wind-maximizing competitive edge, your chartplotter features a pre-race guidance page that shows your virtual starting line along with data fields showing laylines, time to burn before the start and a race timer that can be synchronized across all your networked Garmin GPS products. In addition, other supported sailing features include an enhanced wind rose, heading and course-over-ground lines, set and drift, true and apparent wind data and more.

GPX Waypoints Transfer

If you have waypoints, tracks or frequently used routes stored on another manufacturer’s GPS product — or on a Garmin handheld device — it’s easy to transfer those items to your new Garmin chartplotter via industry-standard GPX software formatting.

In The Box

  • GPSMAP 1042xsv chartplotter
  • Power/data cable
  • NMEA 2000 T-connector
  • NMEA 2000 drop cable (2 m)
  • 8-pin transducer to 12-pin sounder adapter cable
  • Bail mount kit with knobs
  • Flush mount kit with gasket
  • Protective cover
  • Trim piece snap covers
  • Documentation

Connections

  • Garmin Marine Network™ Ports: 2
  • Transducer Ports: 1 (12 Pin)
  • NMEA 2000® Port: 1
  • NMEA 0183 Input Ports: 1
  • NMEA 0183 Output Ports: 1
  • Video Input Ports:  1 BNC
  • Video Output Ports: No
  • Wireless Connectivity: Yes

GMR 18 xHD

  • 4 kW high-definition 18” dome radar
  • Pairs ease of use with advanced open-array features
  • 48 or 24 RPM rotation speeds for fast screen refreshes, auto adjusts as needed based on range
  • 48 Mile max range setting
  • No complex user settings, easy to install and start using

Our next-generation, 4 kW high-definition GMR 18 xHD dome radar pairs ease of use with advanced open-array features. Its intuitive operation makes modes and settings simple to understand so you can enjoy great performance without a lot of technical know-how.

The GMR 18 xHD delivers higher resolution than our previous generation 18” dome radars. New Dynamic Auto Gain and Dynamic Sea Filter continually adjust to your surroundings, providing optimal performance in varying conditions. Choose from multiple levels of aggressiveness or use manual gain adjustment. Dual range operation allows fully independent split-screen display of far and close radar views in full 8-bit color (select chartplotters); range of 48 nm. Optional “No Transmit Zone” can protect areas behind the radar from being radiated while providing full forward-looking radar capability. This makes installation more flexible by providing more suitable installation options on your boat.

In The Box:

  • GMR 18 xHD
  • Mounting hardware kit
  • Power cable (15 m/49.21 ft)
  • Network cable (15 m/49.21 ft)
  • Installation instructions
  • Mounting template
  • Grommet for marine cable

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Icom MR1010RII Marine Radar 4kW Color LCD

Icom MR1010RII Marine Radar 4kW Color LCD

MR1010RII Marine Radar 4kW Color LCD

Commercial-grade radar with exclusive safety features.

Features:

  • Maximum Range: 36NM with 4kW output
  • Scanner Type: 2’ radome scanner
  • Display Type: 10.4″ color TFT LCD

Safety Features

Connect the MR-1010RII to a DSC radio to use the DSC information function. When connected to a DSC radio and a DSC call is received, the received message is transferred to the MR-1010RII. Plot up to 20 DSC messages on the radar echo. If Man Overboard (MOB) position information is transmitted from a DSC handheld transceiver (i.e. M94D), the MR-1010RII can show the MOB waypoint on the radar echo to assist in search and rescue operation.

Connect the MR-1010RII to an external AIS device to use the AIS overlay function. When connected (i.e. M605, M510 AIS, and M506 AIS), up to 100 AIS target icons are overlaid on the radar echo. By selecting an AIS icon, vessel information such as AIS class, MMSI number, vessel name, course, speed, CPA, TCPA, bearing, and distance are shown on the lower side of the display.

Large Color Display

The MR-1010RII gives approximately a 176° viewing angle. The color RFT LCD (480×640 dots) display offers bright vivid echos with 16 steps gradient intensity. Easily adjust the screen color (day, night, and user settings) with the “BRILL” button. In addition, the auto-hide information function enlarges radar echoes to size.

Configure various settings through the MR-1010RII’s visually intuitive operation. The language setting is selectable from English, Indonesian, Korean, Spanish, Thai, and Vietnamese. The large eight-direction cursor key provides smooth operation even when wearing gloves. 

Additional Features:

  • Simplified ARPA function helps prevent collision risk with other vessels or objects
  • TLL (Target Latitude Longitude) function
  • True trail function
  • 10.2-42V wide DC input to prevent over-voltage damage
  • Two user-programmable alarm zones
  • The optional video output unit

Specifications:

Display Unit: 

  • Display Type: 10.4-inch Color TFT LCD
  • Resolution: 480 × 640 dots
  • Type of emission: 16K0G3E (FM)
  • Minimum range: 25 m; 82 ft (at 1⁄8 NM range)
  • Maximum range: 36 NM
  • Range scales: NM 1/8, 1/4, 1⁄2, 3⁄4, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36/km 1/4, 1⁄2, 3⁄4, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36, 48     
  • Preheat time: 90 seconds
  • Power supply: 10.2–42 V DC
  • Power consumption (at zero wind velocity): 55 W (approximately)
  • Usable temperature range: –15°C to +55°C; +5°F to +131°F
  • Input data format: NMEA 0183®, N+1, AUX, IEC61162-2
  • Output data format: NMEA 0183®

Scanner Unit:

  • Type: 60 cm; 2 ft radome scanner
  • Rotation speed: 24, 36 rpm typ.
  • Horizontal beamwidth: 4° typ.
  • Vertical beamwidth: 22° typ.
  • Sidelobe: –22 dB typ.
  • Usable temperature range: –25°C to +70°C; –13°F to +158°F
  • Usable humidity range: Less than 95% (at 40°C; +104°F)
  • Frequency: 9410 MHz ±30 MHz
  • Modulation: P0N
  • Peak output power: 4 kW
  • Pulse-width/repetition rate: 80 ns/2160 Hz, 80 ns/1440 Hz, 250 ns/1440 Hz, 350 ns/1440 Hz, 350 ns/720 Hz, 900 ns/720 Hz
  • Modulator: FET switching
  • Intermediate frequency: 60 MHz
  • IF bandwidth: 10 MHz, 3 MHz
  • Tuning: Auto/manual selectable
  • Supplied system cable: 15 m; 49.2 ft; OPC-2341

Scanstrut APT-250-02 – Aluminum PowerTower® Radar Mount – 10″ Aft Leaning

Scanstrut APT-250-02 - Aluminum PowerTower® Radar Mount - 10" Aft Leaning

APT-250-02 – Aluminum PowerTower® Radar Mount – 10″ Aft Leaning

The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single ‘monocoque’ structure with no joints, offering unparalleled strength and durability.

Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. 

By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.

There is a PowerTower® to fit pretty much every modern radar.

Compatible with:

  • Furuno – 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18″ and 24″) radars
  • Humminbird – AS 21 RD4KW radar
  • Intellian – i1 radars
  • Interphase – Mini RE-1, RE-8 radars
  • JRC – 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars
  • Koden – 2kW 12″ radar
  • KVH – TracVision M1 and TV1 radars
  • Lowrance – 3G/4G, LRA-1800, RB714A, DX42, LRA-2400 HD radars
  • Majestic – SATMAR32 radar
  • Navman – 8000 Series (8084 and 8120) 18″ radars
  • Nobletec – 2kW – 20″ radars
  • Northstar – M Series 18″ and 24″  8000i radars
  • Raymarine – 33STV radars
  • Seiwa – SWR-1, 8, 9 radars
  • Simrad – 3G/4G, GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars
  • Sitex – MDS-1, 8, 12, NKE-1066 radars
  • Techmarine – T-72.01, 72.02, 72.04 Radars

Features:

  • Designed to fit the most up to date radars
  • Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
  • No need to cut the radar’s connectors off for installation 
  • Constructed from the best Marine grade Aluminium
  • A range of accessories light bars can be bolted to the back of the PowerTower®

Technical Specifications:

  • Radar Type – Dome
  • Material – Aluminium
  • Height – 9.84″ (250mm)
  • Mounting Type – Aft leaning – 25°

In the Box:

  • Mount
  • Mounting hardware (excluding screws/bolts) 
  • Installation manual

*Sold as an Individual

Seaview 30″ Tapered Closed Dome AFT Leaning Radar Mount w/Removable Spreader & 10″ x 10″ Base Plate

Seaview 30" Tapered Closed Dome AFT Leaning Radar Mount w/Removable Spreader & 10" x 10" Base Plate

30″ Tapered Closed Dome AFT Leaning Radar Mount with Removable Spreader & 10″ x 10″ Base Plate

The Seaview Tapered Masts are for most 18″ to 24″ closed dome radars or open array radars up to 4.5′.

Durability

Unlike any other mount available, Seaview takes the finish to another level. We take these Tapered Masts in their raw aluminum form through a process called Chem Film. Chem Film is a chemical conversion coating that is used as a light coat of protective covering over aluminum. After the Chem Film process, it is taken through a 3 part epoxy prime and powder coat. This is all done to ensure the best possible finish and corrosion resistance.

Easy Installation

The lower mounting plate will accept most standard 18″ and 24″ radar domes or open array radars up to 4.5′ in length. No need to drill holes to mount your radar allowing for a quick and easy setup.

Spreaders

Spreaders are fitted with standard 1-14 threaded fittings made out of nylon to eliminate corrosion. (Note: do not exceed 4′ antennas on spreaders). The spreaders are also removable to keep shipping costs down.

Top Mounting Plate

Feel free to mount a light to the top mounting plate!

Cable Management

Oval hollow mast section allows for easy cable management.