Search Results for: depth sounder fish finder

Digital Yacht iSeaSense Wireless Speed Depth Temp Pack Plus Wind

Digital Yacht iSeaSense Wireless Speed Depth Temp Pack Plus Wind

iSeaSense Wireless Speed Depth Temp Pack Plus Wind

Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity. This pack includes speed, depth, temperature transducer plus wind sensor.

Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity, allowing maximum flexibility and connectivity.  Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.

Operation:

You can access the iSeaSense dashboard through its web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument data. So no complicated programming software or app is required.

By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.

With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display.  The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.

Key Features:

  • Top quality and highly accurate sensors are used for boat depth, speed, wind, compass, and GPS data.  Data can be shared with other devices on the NMEA 2000 network too.
  • iSeaSense is easy to specify. Everything is included as two main starter packs for easy installation and ordering.  No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.
  • iSeaSense includes the WND100 wind sensor with 20m cable and an interface to “T” directly to the NMEA 2000 backbone.  It means there’s no heavy NMEA 2000 cabling to the top of the mast and no need for complex mast top terminations for the Wind Sensor.
  • iSeaSense also includes depth, speed, and temperature sensors.  A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.
  • A full NMEA 2000 backbone cabling back the wireless interface for connectivity and a spare cable and connection point for additional NMEA 2000 devices are included.
  • With NMEA 2000, expanding the system is easy and you can add any Digital Yacht’s instruments such as GPS, AIS, electronic compass, and more. You can also send the instrument data to your NMEA 2000 chart plotter or display.
  • iSeaSense features an easy-to-use web interface.  No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.
  • You can calibrate the wind sensor via the iSeaSense web interface and also displays true and apparent wind speed and angle plus VMG calculations.
  • The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.
  • The data can also be used by 100 popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.

iSeaSense Pack Features:

  • Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor
  • Pack also includes WND100 mast head wind sensor – adding wind data to the system and network
  • Easy to install mast head unit with 20m cable and NMEA 2000 interface
  • iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad
  • Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location
  • Calibrate the wind sensor via the iSeaSense interface
  • Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays

Interface Features:

  • NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server.
  • Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass
  • Network diagnostics, settings, and calibration capability
  • Data logging
  • Self-powered from NMEA 2000 backbone
  • Integrated wifi antenna typically footprints boats up to 20m
  • Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus)

Transducer Features:

  • Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot
  • Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second
  • 235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders
  • Max depth 100m
  • Supports up to 22-degree hull deadrise
  • Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone
  • Standard 2” thru hull size/diameter
  • Includes Bluetooth interface for advanced calibration and set-up features if required
  • Stainless steel and bronze skin fittings available as an option

Wind Sensor Features:

  • The WND200 package comprises a WND100 mast head unit plus iKonvert NMEA 0183-2000 interface supporting 5Hz fast wind mode
  • 8-18V power with ultra-low 25mA power consumption
  • Supplied with 20m ultra thin 4mm masthead cable for easy cable runs through mast (4 core screened)
  • iKonvert NMEA 2000 interface included for system integration
  • Wind angle accuracy is better than 4 degrees
  • Wind speed accuracy better than 3%
  • Min wind speed 1.7 knots – max 80 knots
  • Settling time typically 1.3 seconds

Digital Yacht iSeaSense Wireless Speed Depth Temp Pack

Digital Yacht iSeaSense Wireless Speed Depth Temp Pack

iSeaSense Wireless Speed Depth Temp Pack

Digital Yacht iSeaSense is a new range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity – allowing for maximum flexibility and connectivity. Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.

Top quality and highly accurate sensors are used for boat depth, speed, compass, and GPS data. Data can be shared with other devices on the NMEA 2000 network too.

iSeaSense is easy to specify. Available as two main starter packs, everything is included for easy installation and ordering.  No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.

iSeaSense Pack 1 is a comprehensive boat depth, speed, and temperature pack.  A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.

A full NMEA 2000 backbone cabling pack is included and the wireless interface for connectivity. There is a spare cable and connection point for additional NMEA 2000 devices such as a multi-function display or Digital Yacht’s range of instruments.

iSeaSense features an easy-to-use web interface.  No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.

The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.

The data can also be used by 100’s popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.

Operation

You can access the iSeaSense dashboard through its own web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument’s data. So no complicated programming software or app is required.

By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.

With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display.  The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.

iSeaSense Pack Features:

  • Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor
  • iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad
  • Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location
  • Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays

Interface Features:

  • NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server.
  • Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass
  • Network diagnostics, settings, and calibration capability
  • Data logging
  • Self-powered from NMEA 2000 backbone
  • Integrated wifi antenna typically footprints boats up to 20m
  • Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus)

Transducer Features:

  • Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot
  • Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second
  • 235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders
  • Max depth 100m
  • Supports up to 22-degree hull deadrise
  • Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone
  • Standard 2” thru hull size/diameter
  • Includes Bluetooth interface for advanced calibration and set-up features if required
  • Stainless steel and bronze skin fittings available as an option

SI-TEX 10″ Chartplotter/Sounder Combo w/Internal GPS & C-MAP 4D Card

SI-TEX 10" Chartplotter/Sounder Combo w/Internal GPS & C-MAP 4D Card

10″ Chartplotter/Sounder Combo with Internal GPS & C-MAP 4D Card

10.4” Touch Screen with Heavy Duty Silicone Keypad so operators can choose to use either the Touch Screen or the Keypad to Operate. The unit can also be programmed to switch between Day Time and Night Time Screens by the operator at custom-selected times.

It has the unique ability to be set up in either Portrait or Landscape Layouts. The mounting bracket has two different attachment points to accommodate the screen layouts. And with a simple menu command, the screen will rotate 90’ degrees from Portrait to Landscape format depending on the customer’s preference.

The unit is very quickly flush-mounted with removable trim pieces on the top and bottom edges to allow the unit to be screwed in from the front.

Features:

  • 100,000 waypoints (A total of 16 colors and 16 icons are selectable for each point with a name tag (8 alphanumeric characters)
  • 50,000 track points (2 types)
  • 100 routes max capacity (20 WPTs per each Route. Each with name tags)
  • Uses the C-Map 4D Cartography Only
  • Internal GPS antenna and the option for a simple passive GPS antenna if needed
  • 52 Channel GPS Receiver that works with U.S. GNSS, Russian GLONASS, and the European GALILEO GPS Networks.
  • Network Data Connections – NMEA-2000 & NMEA-0183

Chartplotter Technical Specifications:

  • Horizontal Positioning Accuracy – Autonomous 2.5m (CEP 50%)
  • Sensitivity – Acquisition (-148 dBm), Tracking (-165 dBm), Reacquisition (-162 dBm)
  • Nav Update – 1Hz, 5Hz
  • Latitude Limits – Between 85°N to 85°S
  • Map Scale – 0.05nm to 1500nm
  • Display Screen – 10.4-inch Color LCD with LED backlight
  • Resolution – SVGA (800 X 600 pixels)
  • Power Supply – DC 12V-36V(+-10%) 12W
  • Operating Temperature – -15°C+50°C

Fishfinder Technical Specifications:

  • Display Mode – Normal (single/dual-frequency), Bottom-lock, Bottom-zoom, A-scope
  • Frequency – 50 and 200 KHz (single or dual)
  • Output Power – 600W/1.5W
  • Range – 600W : 2.5m 600m / 1.5KW: 2.5m 1500m
  • Image speed – Fixed 8 speeds (4/1, 2/1, 1/1, 1/2, 1/4, 1/8, 1/16, 1/32) and stop
  • Function – Gain (auto/manual), Range (auto/manual), Depth with shift (auto/manual), Pulse length selection, White/Black line, Water temperature, Support speed sensor

In the Box:

  • Display Unit
  • US C-Map 4D Card
  • Protector
  • Mounting Bracket
  • Bracket Knobs
  • Fuse & Bolt
  • Power Cable
  • Owner’s Manual

Nobeltec TZ Furuno Sounder Module – Digital Download

Nobeltec TZ Furuno Sounder Module - Digital Download

TZ Furuno Sounder Module – Digital Download

Maximize navigation security and your fishing potential by integrating TIMEZERO software with an Ethernet-based Furuno Sounder. The Furuno sounder models DFF1, DFF3, DFF1-UHD, BBDS1 or FCV1150 are natively compatible with TIMEZERO software, and offer many functions that act as real aids to navigation and fishing, for both professional and recreational users.
Recreational users will appreciate the ability to display the sounder image directly on their computer screen and have full control of the sounder from their computer.

This hardware integration is critical to professional fishermen, allowing them to locate fish and save marks to the sounder image.

Features:
By adding the Furuno Sounder Plus Pack to TIMEZERO software*, the PC display is turned into a powerful, dual-frequency digital fish finder. The following FURUNO Ethernet Sounders models are natively compatible with TIMEZERO software: DFF1, DFF3, BBDS1, DFF1-UHD, or FCV1150 .

  • Enjoy full control of the Furuno sounder directly from the software, with a dedicated sounder Tool Bar in the User Interface
  • Historic data: the user can scroll backwards to view sounder data received within the past 3 minutes (approximately) to identify interesting echoes
  • Add a mark: by double-clicking on the sounder image, a mark will automatically be created in the corresponding point on the navigation chart too
  • Geolocation: by clicking the Event Tool in the Sounder workspace, a mark will be instantly created at the boat’s current location

Historic Data
TIMEZERO stores the data received in the past 3 minutes (approximately). You can then easily go back and identify echoes that seem interesting.

Bottom Discrimination feature available with the FURUNO BBDS1 and DFF1-UHD only:
The bottom discrimination window can be displayed from the Sounder workspace. This information is helpful in spotting the rich fishing ground where you can boost your catch of the day.

Bottom components:
The BBDS1 and DFF1-UHD sounders classify the sea bottom into the following categories of sediment: mud, sand, gravel, and rock. This is achieved by analyzing echo characteristics from the bottom components such as particle size and hardness. In addition to providing the seabed information, they also display its level of certainty in relation to the type of sediment that is shown in your software. This information appears in the discrimination window and lets you know how reliable the data is in particular areas.

Bottom Component Localization:
Rolling the cursor over the bottom discrimination window will automatically display a _red cross_ cursor on the Chart allowing the user to geo-localize any bottom component.

Bottom Hardness:
As the BBDS1 and DFF1-UHD receive bottom hardness data, it is also possible to record this information within the software, along with the bottom depth. You can then display bottom hardness on your chart using a color spectrum, or just in black and white. These colors will indicate the softest bottom (mud) to the hardest bottom sediment (rock).

Connection of these sounder models is very simple – the compact network sounder unit connects directly to your PC via a single Ethernet cable.
(*)Without adding the Furuno Sounder Plus Pack to TIMEZERO software, you will only be able to share standard NMEA0183 or NMEA2000 digital depth data between the Sounder and TIMEZERO.

SI-TEX SVS-760CF Dual Frequency Chartplotter/Sounder w/ C-Map 4D Chart & Bronze Thru-Hull Triducer

SI-TEX SVS-760CF Dual Frequency Chartplotter/Sounder w/ C-Map 4D Chart & Bronze Thru-Hull Triducer

Sitex SVS-760CF Chartplotter/Sounder w/B744V-CX Thru Hull Transducer Combo

The versitile SVS-760CF is a combination digital echo sounder and chartplotter with built-in 50-channel GPS receiver capable of running both C-MAP MAX and Navionics Gold cartograph.

The 50/200kHz SVS-760 sounder features powerful 600W output and a vertically oriented, sunlight viewable 7.5″ color LCD display that optimizes presentation of bottom composition/contour and fish targets beneath the vessel. With depth ranges down to 4,800 feet, a high-resolution color LCD display, clearly marked controls and large, easy-to-use controls, this sounder is ideal for professional users as well as serious sportfishing duty.

SI-TEX’s digital sounding technology eliminates unwanted noise and provides a sharp image of the seabed and fish targets. The unit’s high-speed CPU delivers seamless zooming and provides superior readings even at higher boat speeds. This powerful processor also ensures that even the smallest fish targets are presented on the display. Among the SVS-760CF’s long list of professional sounder features are White Line/Black Line Bottom Discriminator to separate bottom-hugging fish from the sea floor, Auto/Manual Gain and Range Selection, Bottom Lock, Bottom Zoom and A-Scope. Users can select from various fish symbols based on the size and type of targets being marked.

For enhanced operation and awareness, alarms are provided for Depth, Fish School and Water Temperature. The SVS-760CF also features an SD card slot, allowing fishermen to back up information and record data on important fishing spots.

The SVS-760CF delivers all this fishfinding performance with the added capabilities of a powerful chartplotter. The ability to run both types of cartography in the same machine allows boaters to select the platform that works best for their region, personal preference and specific boating needs on any given voyage. This machine also provides Navionics Sonar Chart Bathymetric recording capability, allowing boaters to survey their own areas and have this data added to the Navionics Sonar Chart Database. The unit is also Navionics Community Layer capable, allowing users to download the latest information for their chart area.

The SVS-760CF offers tremendous memory, with storage for 20,000 marks/waypoints, 100 routes and 50,000 track points. It is also designed for easy integration with SI-TEX’s Metadata AIS module (or other AIS receivers) for enhanced situational awareness and safety at sea.

All this technology is contained in a rugged, compact IPX-7 waterproof case that can be mounted indoors or out, on any style or size of boat.

B744V Thru-Hull Triducer 600kW, 50/200kHzThe B744V Triducer Multisensor provides you with depth, speed, and temperature in one thru-hull housing. This unit is ideal for all 600 Watt fishfinders and requires only a single hole in the hull. The B744V’s valve assembly prevents water from rushing into the hull when the insert is removed for cleaning or storage. The innovative housing design allows the TRIDUCER Multisensor to be fully recessed into its custom High-Performance Fairing. The end result is a streamlined installation. At speeds above 30 knots (34 MPH), the B744V will produce clear images and solid bottom tracking.

Features:

  • Thru Hull Bronze Housing
  • Frequency: 50/200 kHz
  • Cone: 45 Degrees/12 Degrees
  • Depth, speed, and temperature in one housing
  • Maximum depth range 50 kHz 235m to 353m (800′ to 1,200′) – 200 kHz 118m to 206m (400′ to 700′)
  • Greatly improved high-speed performance at both 50 kHz and 200 kHz when installed with a high-performance fairing
  • Self-closing sea valve reduces water flow into the hull when paddlewheel insert is removed
  • Speed Operating Range: 1 knot to 45 knots (1 MPH to 52 MPH)
  • The extra length of the B744VL allows mounting into thicker and/or high deadrise hulls
  • Boat Size: 9m (30′) and up
  • Speed insert is easily removed for service or storage
  • Fins on sides of paddlewheel cavity improve accuracy at low speeds and in cross flow conditions
  • Valve assembly is replaceable
  • Airmar’s fairings are easy to cut and will not swell or rot
  • 8 pin connector
  • Shielding eliminates interference between the speed and depth sensors for more accurate instrument readings

Fishing Applications:

  • Inshore or coastal fishing in shallow to medium depths
  • Slow trolling, structure fishing and drifting
  • Deep-water lake fishing

SI-TEX SVS-760 Dual Frequency Sounder 600W Kit w/Bronze Thru-Hull Speed & Temp Transducer

SI-TEX SVS-760 Dual Frequency Sounder 600W Kit w/Bronze Thru-Hull Speed & Temp Transducer

SVS-760 Dual Frequency Sounder – 600W

The 50/200kHz SVS-760 sounder features powerful 600W output and a vertically oriented, sunlight viewable 7.5″ color LCD display that optimizes presentation of bottom composition/contour and fish targets beneath the vessel. With depth ranges down to 4,800 feet, a high-resolution color LCD display, clearly marked controls and large, easy-to-use controls, this sounder is ideal for professional users as well as serious sportfishing duty.

SI-TEX’s digital sounding technology eliminates unwanted noise and provides a sharp image of the seabed and fish targets. The unit’s high-speed CPU delivers seamless zooming and provides superior readings even at higher boat speeds. This powerful processor also ensures that even the smallest fish targets are presented on the display.

Among the SVS-760’s long list of professional sounder features are White Line/Black Line Bottom Discriminator to separate bottom-hugging fish from the sea floor, Auto/Manual Gain and Range Selection, Bottom Lock, Bottom Zoom and A-Scope. Users can select from various fish symbols based on the size and type of targets being marked.

For enhanced operation and awareness, alarms are provided for Depth, Fish School and Water Temperature. The SVS-760 also features an SD card slot, allowing fishermen to back up information and record data on important fishing spots.

Features:

  • 7.5″ color LCD display
  • 50/200 kHz
  • High resolution display
  • SD card slot

B744V Thru-Hull Triducer 600kW, 50/200kHz

The B744V Triducer Multisensor provides you with depth, speed, and temperature in one thru-hull housing. This unit is ideal for all 600 Watt fishfinders and requires only a single hole in the hull. The B744V’s valve assembly prevents water from rushing into the hull when the insert is removed for cleaning or storage. The innovative housing design allows the TRIDUCER Multisensor to be fully recessed into its custom High-Performance Fairing. The end result is a streamlined installation. At speeds above 30 knots (34 MPH), the B744V will produce clear images and solid bottom tracking.

Features:

  • Thru Hull Bronze Housing
  • Frequency: 50/200 kHz
  • Cone: 45°/12°
  • Depth, speed, and temperature in one housing
  • Maximum depth range 50 kHz 235m to 353m (800′ to 1,200′) – 200 kHz 118m to 206m (400′ to 700′)
  • Greatly improved high-speed performance at both 50 kHz and 200 kHz when installed with a high-performance fairing
  • Self-closing sea valve reduces water flow into the hull when paddlewheel insert is removed
  • Speed Operating Range: 1 knot to 45 knots (1 MPH to 52 MPH)
  • The extra length of the B744VL allows mounting into thicker and/or high deadrise hulls
  • Boat Size: 9m (30′) and up
  • Speed insert is easily removed for service or storage
  • Fins on sides of paddlewheel cavity improve accuracy at low speeds and in cross flow conditions
  • Valve assembly is replaceable
  • Airmar’s fairings are easy to cut and will not swell or rot
  • 8 pin connector
  • Shielding eliminates interference between the speed and depth sensors for more accurate instrument readings

Fishing Applications:

  • Inshore or coastal fishing in shallow to medium depths
  • Slow trolling, structure fishing and drifting
  • Deep-water lake fishing

SI-TEX CVS-126 Dual Frequency Color Echo Sounder w/Transom Mount Triducer 250/50/200ST-CX

SI-TEX CVS-126 Dual Frequency Color Echo Sounder w/Transom Mount Triducer 250/50/200ST-CX

CVS-126 with Transom Mount Triducer

CVS-126 Dual Frequency Color LCD Echo Sounder

The SI-TEX CVS-126 Dual-Frequency (50/200kHz) Echo Sounder features a digital signal processor (DSP) for a clearer image that enhances fish targets in shallow and deep depths, plus auto function for the most reliable setting and best performance.

Features:

  • Digital 5.7″ Dual-Frequency Color LCD Fishfinder
  • DSP technology for a clearer detailed image that enhances fish targets
  • Digital signal processing
  • State-of the-art digital signal processor offers advanced filtering capabilities
  • Digital Filtering feature eliminates clutter by filtering out the noise to provide a clear detailed image that enhances fish targets in shallow and deep depths
  • Making it easy to differentiate between baitfish, larger fish, schools of fish and the sea floor
  • Sona-Tone
  • Exclusive Sona-Tone identifies what’s under your boat with different sounds for fish and schools of fish. So you will not miss any good opportunites even if you are away from the CVS-126
  • Automatic Functions
  • For best performance the Auto Function mode chooses the most reliable setting for such functions as Gain, Range and Shift
  • Optimum settings are continuously selected automatically (GAIN, RANGE, SHIFT)
  • Fishing Hot Spots
  • Leads you back to your favorite fishing hot spots or other previously saved positioning in memory with input from optional GPS sensor
  • Store the Image
  • YouStores up to 10 screen images in built-in memory for recalling later by “one-touch”
  • Great for recalling a potential hot spot for review later
  • Easy Operation
  • Easy access to all system functions with simply arranged keypad, dedicated-functions keys, rotary-knob control of Gain/Selection and comprehensive on-screen menus
  • Sunlight Viewable
  • Brilliant 5.7″ color LCD display with 8, 16, or 64 color levels and an anti-reflective coating for excellent readability in direct sunlight

Transom Mount Triducer 250/50/200ST-CX

Transom Mount Triducer included for the CVS-126 Dual Frequency Color Echo Sounder.

SI-TEX CVS-126 Dual Frequency Color Echo Sounder w/600kW Thru-Hull Tranducer 307/50/200T-CX

SI-TEX CVS-126 Dual Frequency Color Echo Sounder w/600kW Thru-Hull Tranducer 307/50/200T-CX

CVS-126 with Thru-Hull Transducer

CVS-126 Dual Frequency Color LCD Echo Sounder

The SI-TEX CVS-126 Dual-Frequency (50/200kHz) Echo Sounder features a digital signal processor (DSP) for a clearer image that enhances fish targets in shallow and deep depths, plus auto function for the most reliable setting and best performance.

Features:

  • Digital 5.7″ Dual-Frequency Color LCD Fishfinder
  • DSP technology for a clearer detailed image that enhances fish targets
  • Digital signal processing
  • State-of the-art digital signal processor offers advanced filtering capabilities
  • Digital Filtering feature eliminates clutter by filtering out the noise to provide a clear detailed image that enhances fish targets in shallow and deep depths
  • Making it easy to differentiate between baitfish, larger fish, schools of fish and the sea floor
  • Sona-Tone
  • Exclusive Sona-Tone identifies what’s under your boat with different sounds for fish and schools of fish. So you will not miss any good opportunites even if you are away from the CVS-126
  • Automatic Functions
  • For best performance the Auto Function mode chooses the most reliable setting for such functions as Gain, Range and Shift
  • Optimum settings are continuously selected automatically (GAIN, RANGE, SHIFT)
  • Fishing Hot Spots
  • Leads you back to your favorite fishing hot spots or other previously saved positioning in memory with input from optional GPS sensor
  • Store the Image
  • YouStores up to 10 screen images in built-in memory for recalling later by “one-touch”
  • Great for recalling a potential hot spot for review later
  • Easy Operation
  • Easy access to all system functions with simply arranged keypad, dedicated-functions keys, rotary-knob control of Gain/Selection and comprehensive on-screen menus
  • Sunlight Viewable
  • Brilliant 5.7″ color LCD display with 8, 16, or 64 color levels and an anti-reflective coating for excellent readability in direct sunlight

Thru-Hull Transducer 307/50/200T-CX

Thru-Hull Transducer included for the CVS-126.

SI-TEX CVS-126 Dual Frequency Color Echo Sounder w/600kW Thru-Hull Transducer 1700/50/200T-CX

SI-TEX CVS-126 Dual Frequency Color Echo Sounder w/600kW Thru-Hull Transducer 1700/50/200T-CX

CVS-126 with Thru-Hull Transducer

CVS-126 Dual Frequency Color LCD Echo Sounder

The SI-TEX CVS-126 Dual-Frequency (50/200kHz) Echo Sounder features a digital signal processor (DSP) for a clearer image that enhances fish targets in shallow and deep depths, plus auto function for the most reliable setting and best performance.

Features:

  • Digital 5.7″ Dual-Frequency Color LCD Fishfinder
  • DSP technology for a clearer detailed image that enhances fish targets
  • Digital signal processing
  • State-of the-art digital signal processor offers advanced filtering capabilities
  • Digital Filtering feature eliminates clutter by filtering out the noise to provide a clear detailed image that enhances fish targets in shallow and deep depths
  • Making it easy to differentiate between baitfish, larger fish, schools of fish and the sea floor
  • Sona-Tone
  • Exclusive Sona-Tone identifies what’s under your boat with different sounds for fish and schools of fish. So you will not miss any good opportunites even if you are away from the CVS-126
  • Automatic Functions
  • For best performance the Auto Function mode chooses the most reliable setting for such functions as Gain, Range and Shift
  • Optimum settings are continuously selected automatically (GAIN, RANGE, SHIFT)
  • Fishing Hot Spots
  • Leads you back to your favorite fishing hot spots or other previously saved positioning in memory with input from optional GPS sensor
  • Store the Image
  • YouStores up to 10 screen images in built-in memory for recalling later by “one-touch”
  • Great for recalling a potential hot spot for review later
  • Easy Operation
  • Easy access to all system functions with simply arranged keypad, dedicated-functions keys, rotary-knob control of Gain/Selection and comprehensive on-screen menus
  • Sunlight Viewable
  • Brilliant 5.7″ color LCD display with 8, 16, or 64 color levels and an anti-reflective coating for excellent readability in direct sunlight

Thru-Hull Transducer 1700/50/200T-CX

Bronze Thru-Hull Transducer with Beam Angle 45 degrees @50kHz and 11 degrees @ 200kHz included for the CVS-126.

SI-TEX CVS-126 Dual Frequency Color Echo Sounder w/B60 12° Transducer B-60-12-CX

SI-TEX CVS-126 Dual Frequency Color Echo Sounder w/B60 12° Transducer B-60-12-CX

CVS-126 with B60 12° Transducer

CVS-126 Dual Frequency Color LCD Echo Sounder

The SI-TEX CVS-126 Dual-Frequency (50/200kHz) Echo Sounder features a digital signal processor (DSP) for a clearer image that enhances fish targets in shallow and deep depths, plus auto function for the most reliable setting and best performance.

Features:

  • Digital 5.7″ Dual-Frequency Color LCD Fishfinder
  • DSP technology for a clearer detailed image that enhances fish targets
  • Digital signal processing
  • State-of the-art digital signal processor offers advanced filtering capabilities
  • Digital Filtering feature eliminates clutter by filtering out the noise to provide a clear detailed image that enhances fish targets in shallow and deep depths
  • Making it easy to differentiate between baitfish, larger fish, schools of fish and the sea floor
  • Sona-Tone
  • Exclusive Sona-Tone identifies what’s under your boat with different sounds for fish and schools of fish. So you will not miss any good opportunites even if you are away from the CVS-126
  • Automatic Functions
  • For best performance the Auto Function mode chooses the most reliable setting for such functions as Gain, Range and Shift
  • Optimum settings are continuously selected automatically (GAIN, RANGE, SHIFT)
  • Fishing Hot Spots
  • Leads you back to your favorite fishing hot spots or other previously saved positioning in memory with input from optional GPS sensor
  • Store the Image
  • YouStores up to 10 screen images in built-in memory for recalling later by “one-touch”
  • Great for recalling a potential hot spot for review later
  • Easy Operation
  • Easy access to all system functions with simply arranged keypad, dedicated-functions keys, rotary-knob control of Gain/Selection and comprehensive on-screen menus
  • Sunlight Viewable
  • Brilliant 5.7″ color LCD display with 8, 16, or 64 color levels and an anti-reflective coating for excellent readability in direct sunlight

B60 12° Transducer B-60-12-CX

Low profile 12° tilted element transducer for 8° to 15° deadrise hulls.

Features:

  • 600 Watts
  • Dual 50/200kHz